Fuji
Aimex Placement
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
General reference — not yet source-verifiedThe Fuji Aimex is an SMT placement machine used in assembly processes.
How it works
General reference — not yet source-verifiedAn SMT placement machine places electronic components onto prepared circuit boards in a controlled pick-and-place sequence.
The machine class typically uses automated motion, vision-assisted alignment, and feeder-based part presentation to position components before solder attachment in a downstream process.
Where it fits in the process flow
General reference — not yet source-verifiedThe Fuji Aimex sits in the surface-mount assembly flow after solder paste deposition and before component soldering.
The machine supports board build-up by placing components onto populated assembly sites that later pass to reflow soldering.
Applications
General reference — not yet source-verifiedThe Fuji Aimex is used for electronic assembly work that requires automated surface-mount component placement.
The machine class is used for printed circuit board production in electronics manufacturing.
What do the numbers mean?
Power & electrical5
Configuration & options2
- 3 Pahse[1]
What replaced it?
Alternatives
Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.
- Juki KE 2060 RE— Same function class: Assembly / SMT, UnknownCompare in depthsource[1]
- Juki KE 2050 RE— Same function class: Assembly / SMT, UnknownCompare in depthsource[1]
- ASM Siplace SX— Same function class: Assembly / SMT, UnknownCompare in depthsource[1]
- Universal Instruments PEPP 1 DS 1— Same function class: Assembly / SMT, UnknownCompare in depthsource[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What is the model designation?
The model designation is Aimex.[1]
Not publicly documented
The following facts about the Aimex Placement are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Aimex Placement are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Aimex Placement are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Aimex Placement are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Aimex Placement are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Aimex Placement is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Inventory photo
Last updated Oct 9, 2026.
Compare with similar tools
View all →
The Juki KE 2050 RE is a pick-and-place SMT machine for small chip components, SOTs, and ICs.
The Juki KE 2060 RE is a pick-and-place SMT machine for small chip components, SOTs, and ICs.
The Universal Instruments PEPP 1 DS 1 is a pick-and-place assembly machine.
