Buehler
IsoMet 1000 Precision
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
How it works
The IsoMet 1000 employs a gravity-feed loading design. The sample is clamped in a chuck on a pivoting arm; counterbalance weights and a sliding load weight system apply a controlled downward force (0-500 g standard, 0-800 g with optional weight kit). The blade rotates at a user-set speed and the sample arm lowers as the blade cuts, with no forced feed that could damage the sample.[2]
The front control panel includes a membrane touch pad with dual triple-digit LED displays. The operator sets blade speed using increase/decrease buttons and can toggle between inch and millimeter readout. A digital micrometer controls sample positioning. The machine has a ZERO POSITION button that resets the blade-position display to 00.0. The BLADE button starts and stops the spindle; the indicator lights when the blade is running. The POWER button switches the unit on and off. The end-of-cut adjustment knob under the hood sets the total travel of the sample arm; when travel is complete the saw automatically stops.[3]
The sample arm has three positions selected according to blade diameter and cutting angle. A removable coolant tray is accessible from the front for cleaning and sample retrieval. The tray incorporates a dressing chuck with a manual feed knob for dressing the diamond blade. The saw can accommodate multiple blades for gang sawing by using spacers.[3][1]
Applications
The IsoMet 1000 is designed to section a wide variety of materials including metals, plastics, biomaterials, minerals, ceramics, composites, rocks, and electronic components. The saw can also cut cements, laminates, and printed circuit boards. A range of application-specific diamond wafering blades is available to match the material being cut.[1][2]
What do the numbers mean?
Power & electrical1
Control & software1
Dimensions & facilities3
Configuration & options5
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Voltage/Frequency85-264V, 50/60Hz[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What blade diameters does the IsoMet 1000 support?
The IsoMet 1000 accepts blades with diameters from 4 in (102 mm) up to 7 in (178 mm), using a 0.5 in (12.7 mm) arbor.[1]
What is the variable speed range of the blade?
The wheel speed is adjustable from 100 rpm to 975 rpm.[1][2]
What is the motor power and electrical requirement?
The motor is 1/8 HP (90 W) DC. The unit operates on 85-264 V AC, 50/60 Hz, single phase.[1][2]
What is the shipping weight of the IsoMet 1000?
The shipping weight is 75 lb (34 kg).[2]
Not publicly documented
The following facts about the IsoMet 1000 Precision are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the IsoMet 1000 Precision are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the IsoMet 1000 Precision are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the IsoMet 1000 Precision are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the IsoMet 1000 Precision are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the IsoMet 1000 Precision is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]documents.thermofisher.com — documents.thermofisher.comdocuments.thermofisher.com
- [2]fab.cba.mit.edu — fab.cba.mit.edufab.cba.mit.edu
- [3]BUEHLER ISOMET 1000 MANUAL Pdf Download | ManualsLib — manualslib.commanualslib.com
- [4]Equipment inventory listing
Last updated Sep 27, 2026.
Compare with similar tools
View all →
The Lapmaster Model 15 is a bench-mounted unit with a rigid, lightweight, cast aluminum base, of the 'ring lapper' configuration, enabling high standards of flatness and surface finish.
General referenceThe Blanchard 18 D Surface is a vertical-spindle rotary-table surface grinding machine used to produce flat, parallel surfaces on metal workpieces.
The Blanchard 20 36 Surface is a surface grinder used in dicing and grinding applications.
