Juki

Juki IFS NX Programming Station is a programming station that includes a Juki Feeder Setup Jig.

The Juki KE 2060 RE is a pick-and-place SMT machine for small chip components, SOTs, and ICs.

JUKI launched the Multitask Platform JM-E01 in December 2024.

The Juki CX-1 placement system is a high-accuracy SMT placement machine designed for advanced packages such as SiP and MCM, featuring glass linear encoders and two operating modes.

JUKI launched the Fast Smart Modular Mounter RS-2 in January 2025.

The Juki 2070 (also designated KE-2070) is a high-speed chip shooter and high-speed flexible mounter used for placing electronic components on printed circuit boards.

The Juki CX 1 Mounter is a component placement system (mounter) manufactured by Juki.

The Juki FX 3 RAL is a pick-and-place machine described with dual head, four tables, six segments per head, and 220 V / 60 Hz power.

The JUKI DX-01 is a 1-needle lockstitch sewing system with electronic belt feed.

The Juki FF 16 NS X is a 16mm SMT feeder, part of the IFS-NX series, used for component feeding in pick-and-place machines.

The JUKI LK-1900C is a high-speed electronic bartacking sewing system announced in 2024.

The GKG GT++ is a fully automatic SMT stencil printer designed for high-precision solder paste printing on PCBs up to 510x510 mm.

The Juki GKG GL+ is a printer manufactured by Juki.

The Juki RF 12 AS is a feeder manufactured by Juki.

The Juki RV 2 3 D SPI is a solder paste inspection (SPI) tool.

The Juki GL is a solder paste printer used in surface-mount technology (SMT) assembly.

The Juki RX 7 R is a high speed chip mounter.

The Juki RV 2 2 D AOI is an automated optical inspection system.

The Juki RF 32 AS Feeder is a 32mm electric feeder for Juki pick-and-place machines, compatible with RS-1, RX-7, and KE-3000 series.

The Juki RF 24 AS Feeder is an electric feeder for 24mm tape, compatible with Juki pick-and-place machines such as the RS-1, RX-7, and KE-3000 series.

The Juki RF 16 AS Feeder is a high-speed electric feeder used with Juki chip mounters, part of the RF series.

The Juki RF 08 AS Feeder is a feeder device.

The Juki GL Plus In-Line is an in-line screen printer with auto leveling, PCB thickness adjustment, auto conveyor width adjustment, flexible auto clamp, auto stencil cleaning, automatic 2D paste inspection, and a look up/down vision system.

The Juki 2070 L is Juki-manufactured equipment specified to operate on a 50/60 Hz, 3-phase electrical supply.

The Juki CF 081 ER X Feeders are Juki SMT feeders described as a lot of 10 Juki 8mm feeders.

The Juki FF 32 NS X is a 32 mm tape feeder used for surface-mount assembly.

The Juki KE 3010 AL Placement is an Assembly / SMT placement system.

The Juki RS 800 II is a reflow oven with air-only heating, 8-zone top/bottom heat, and a mesh conveyor.

The Juki JM 100 Placement System is a placement system identified by model JM 100.

The Juki RS 1 is a pick-and-place machine described with 220 V, 60 Hz, two tables, a single head, and eight segments per head.

The Juki KE 3020 VAL Placement System is a placement system with feeder trolleys, a conveyor, laser and high-precision placement heads, camera vision centering, and an IFS-NX machine upgrade.

The Juki Feeder Setup Station is a feeder setup station mounted on locking casters.

The Juki FF 12 NS X is a 12mm tape feeder from the IFS-NX series used in SMT assembly.

The Juki KE 2080 L is a pick-and-place machine with a TR5 tray server and 50/60 Hz, 3-phase power.

The Juki FF 24 NS X is a 24mm feeder in the IFS-NX series, manufactured by Juki.

The Juki KE 2050 RE is a pick-and-place SMT machine for small chip components, SOTs, and ICs.

The Juki KE 2060 L is a pick and place machine.