Comparison ledger
Accretech UF 300, Accretech UF 300 A Automatic Wafer, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | UF 300Accretech | UF 300 A Automatic WaferAccretech |
|---|---|---|
| OEM | Accretech | Accretech |
| Category | Test & Probe | Test & Probe |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | 2001 Vintage |
| Control system | — | — |
| Generation | — | — |
| Family | Accretech UF 300 | Accretech UF 300 |
| Cited variants |
| — |
| Specifications | ||
| Configuration | Includes Loader[2] | Nickel chuck[4] |
| OCR | Yes[2] | — |
| Interface | GPIB[2] | — |
| Cleaning Pad | Yes / Ceramic[2] | — |
| Chuck Controller | Ambient to 125°C[2] | — |
| XY Position Accuracy | Yes[2] | — |
| Needle Alignment | Yes[2] | — |
| Auto Needle Height Setting | Yes[2] | — |
| GPIB | Yes[2] | — |
| Auto Alignment | Yes, Needle & Wafer[2] | — |
| Wafer Loader | Foup & Inspection Tray[2] | — |
| Manufacturer | Accretech / TSK[2] | — |
| Model | UF 300[2] | UF 300 A[4] |
| Category | Test & Probe[3] | — |
| Wafer sizes | 8 inch, 12 inch[2] | — |
| Includes loader | Yes[2] | — |
| Chuck | 12 inch chuck[2] | Nickel chuck[4] |
| Color LCR display | Yes[2] | — |
| Operator terminal & keyboard | Included[2] | — |
| Power cord for prober | Included[2] | — |
| Floppy disk with configuration files | Included[2] | — |
| Backup of configuration files | On internal hard drive inside the prober[2] | — |
| Power Cord | Included[2] | — |
| Backup of Configuration Files on Internal Hard Drive | Included[2] | — |
| Phase | — | 1 Phase[4] |
| Cognex board type | — | 8200[5] |
| Voltage | — | 208V[5] |
| OEM | — | Accretech / TSK[4] |
| Equipment type | — | Automatic Wafer Prober[4] |
| Wafer size | — | 8 inch[4] |
| Power | — | 1 Phase[4] |
| Vintage | — | 2001[4] |
| Keyboard/joystick | — | Keyboard, joystick[5] |
| Storage | — | 3.5" floppy disk / 3.5" hard disk[5] |
| Printer | — | Internal printer[5] |
| Interfaces | — | GPIB I/F, RS232 I/F, Ethernet I/[5] |
| Functions | — | Probe mark inspection; automatic probe to pad alignment; multi-die probing up to 256 DUTs; multi function cleaning pad; automatic needle height alignment; soak time option; new E2 camera update[5] |
| Chuck Type | — | Nickel chuck (some units) or gold plated chuck (other units)[5] |
| Automation | — | Fully automatic[5] |
| Probe Card Change | — | Included[5] |
| User Interface | — | Keyboard, joystick, 3.5" floppy disk / hard disk, internal printer[5] |
| Vision System | — | Cognex board type 8200, New E2 camera update[5] |
| Probing Features | — | Multi-die probing up to 256 DUTs, automatic probe to pad alignment, probe mark inspection, automatic needle height alignment[5] |
| Cleaning | — | Multi function cleaning pad[5] |
| Soak Option | — | Soak time option[5] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →