Comparison ledger
Laurell H6-23, Laurell WS-650, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | H6-23Laurell | WS-650Laurell |
|---|---|---|
| OEM | Laurell | Laurell |
| Category | Spin coater | Spin coater |
| Wafer size | 150mm | 150mm |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | 650-series HL | — |
| Family | Laurell H6-23 | Laurell WS-650 |
| Specifications | ||
| Maximum rotational speed | 12,000 RPM (based on a ø 100mm silicon wafer)[1] | — |
| Wafer capacity | Up to ø 150mm wafers[1] | — |
| Substrate capacity | 5" × 5" (127mm × 127mm) substrates[1] | — |
| Power | 95 to 240VAC, 47/63HZ, ~300 Watts[1] | — |
| Category | Spin coater[1] | — |
| Wafer size | Up to 150 mm wafers[1] | — |
| Substrate size | 5 in x 5 in (127 mm x 127 mm) substrates[1] | Up to 150 mm round substrates and 125 mm square substrates[2] |
| Speed basis | Based on a 100 mm silicon wafer[1] | — |
| Series | 650-series HL coater system[1] | — |
| Equipment type | — | Cleanroom Instrumentation; Thin Film Fabrication[2] |
| Use | — | Should be used only for spincoating of photoresists[2] |
| Speed range | — | 100-12,000 RPM[2] |
| Substrate thickness | — | 0.1 to 1 mm[2] |
| Adapter | — | Wafer Fragment Adapter for 10–50 mm substrate fragments[2] |
| Location | — | FNT 4.106[2] |
| Installed location | — | Photolithography hood[2] |
| Model | — | Laurell WS-650[3] |
| Type | — | Spin coater[3] |
| Purpose | — | Coating photoresist on samples of various sizes[3] |
| Wafer size support | — | 50 mm through 150 mm substrates[3] |
| Controller speed range | — | 100-8000 rpm[3] |
| Speed resolution | — | 0.5 rpm[3] |
| Program capacity | — | Up to twenty 51-step programs[3] |
| Vacuum chuck | — | 1.75 inch natural propylene vacuum chuck[3] |
Plan your fab
Building a Spin coater process? Get a complete equipment list.
Open the fab equipment planner →