Comparison ledger
KLA Archer 10 XT Overlay, Zygo Z3D-7000, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | Z3D-7000Zygo | |
|---|---|---|
| OEM | KLA | Zygo |
| Category | Metrology & Inspection | Metrology & Inspection |
| Wafer size | 200mm | 200mm |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | 5th generation |
| Family | KLA Archer | Zygo Z3D-7000 |
| Specifications | ||
| Configuration | During refurbishment the loadports were replaced with the cassette loader that is shown in our video below[1] | — |
| Wafer size | 200mm dual port open wafer handler[1] | — |
| OEM | KLA[2] | — |
| Model | Archer 10 XT Overlay[2] | — |
| Category | Metrology & Inspection[2] | — |
| Description | 200mm overlay metrology system[2] | — |
| Software version | 5.6[1] | — |
| Wafer handler | 200mm dual port open wafer handler[1] | — |
| Chuck | 8" chuck[1] | — |
| Computer upgrade | XP computer upgrade[1] | — |
| Computer | KLASS RS2 computer[1] | — |
| Measurement type | — | Non-contacting, non-destructive optical metrology[3] |
| Wafer sizes | — | 200 mm and 300 mm wafers[3] |
| Bridge-tool configuration | — | Can be configured to simultaneously handle both wafer sizes[3] |
| Key features | — | High speed non-contacting metrology; simultaneously measures multiple parameters; ISO Class 2, S2/S8, and CE certified; SEMI E95 compliant software; modular IntelliSensors reduce MTBR[3] |
| Technology | — | ZYGO's fifth generation interferometric technology[3] |
| Software | — | MetroPro software[3] |
| Loaded wafers | — | FOUPS and/or open cassettes[3] |
| Throughput | — | Exceeds throughput of contact technologies (profilers, atomic force microscopes) by a factor of 10[3] |
| Simultaneous measurements | — | Film thickness, critical dimensions, overlay, trench depth, and general surface topography[3] |
| Precision | — | Sub-nanometer precision for critical etch depth processes[3] |
| Wafer loading | — | FOUPS and/or open cassettes, pre-alignment, super flat chuck[3] |
| Certifications | — | ISO Class 2, S2/S8, CE certified[3] |
| Software compliance | — | SEMI E95 compliant[3] |
| Modular sensors | — | IntelliSensors reduce MTBR[3] |
| Algorithms | — | OneShot, TopSlice, FilmSlice[3] |
Plan your fab
Building a Metrology & Inspection process? Get a complete equipment list.
Open the fab equipment planner →