Comparison ledger
ERSA Versaflow 40 50 Selective Soldering, Juki 2060, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 2060Juki | |
|---|---|---|
| OEM | ERSA | Juki |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | ERSA Versaflow 40 50 Selective Soldering | Juki 2060 |
| Specifications | ||
| Base system dimensions (L x W x H) | 2,580 mm x 1,525 mm x 1,800 mm[1] | — |
| Length incl. conveyor | 3,580 mm[1] | — |
| Weight (without solder) | approx. 1,100 kg[1] | — |
| Conveyor type | Pin and chain conveyor for pallets (roller conveyor optional)[1] | — |
| Conveyor angle | 0° fixed[1] | — |
| Pallet width range | 50–400 mm (option 50–500 mm)[1] | — |
| Pallet length range | 120–500 mm (option 120–600 mm)[1] | — |
| PCB top side clearance | max. 100 mm (from PCB bottom side)[1] | — |
| PCB bottom side clearance | max. 30 mm[1] | — |
| Conveyor speed | approx. max. 10 m/min[1] | — |
| Positioning accuracy (conveyor) | ±0.25 mm[1] | — |
| Flux type | High-precision spray fluxer[1] | — |
| Flux axes | 2-axis (X/Y), servomotor driven[1] | — |
| Flux tank capacity | 2 l[1] | — |
| Preheat type | Dynamic bottom side IR emitters[1] | — |
| Preheat connected power | max. 10,200 W[1] | — |
| Solder pot material | Stainless steel[1] | — |
| Solder axes | 3-axis (X/Y/Z), servomotor driven[1] | — |
| Smallest nozzle diameter | 4.5 mm[1] | — |
| Solder wave height | max. 5 mm[1] | — |
| Solder volume | 10 kg (when using Sn63Pb)[1] | — |
| Max solder temperature | 330°C[1] | — |
| Warm-up time | 1.5 hours[1] | — |
| Nitrogen consumption | approx. 2 m³/h[1] | — |
| Nitrogen required pressure | 3 bar[1] | — |
| Compressed air required pressure | 6 bar[1] | — |
| Power supply | 3 x 230/400 V, N, PE, 5-wire system[1] | — |
| Power consumption (basic system) | max. 26 kW[1] | — |
| Exhaust volume per stack | approx. 150 m³/h[1] | — |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →