Comparison ledger
Dek Horizon 03 i X, Speedline Accuflex, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | AccuflexSpeedline | |
|---|---|---|
| OEM | Dek | Speedline |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | 2003 Document date |
| Control system | — | — |
| Generation | — | — |
| Family | Dek Horizon 03 | Speedline Accuflex |
| Specifications | ||
| Voltage | 230 V[2] | — |
| Configuration | 10 A[2] | 220-240 V[1] |
| Max print area | 510x508mm[3] | — |
| Screen Frame size | 736x736mm[3] | — |
| Operating software version | O/S Win XP[3] | — |
| Machine software version | 09SP13[3] | — |
| Equipment type | Screen printer[2] | — |
| Make | Dek[2] | — |
| Model | Horizon 03 i X[2] | — |
| Power | 230 V, 10 A, 50/60 Hz[2] | 1 KVA[1] |
| Vintage | 2015[2] | — |
| Largest Single Load | — | 1 A[1] |
| Full Load Current | — | 3 A[1] |
| Machine type | — | Fully automatic screen/stencil printer[4] |
| Application | — | Deposits print medium on circuit boards to enable application of surface mount components[4] |
| Category | — | Assembly / SMT[5] |
| Frequency | — | 50/60 Hz[1] |
| Maximum board size | — | 584 mm x 508 mm (23" x 20")[6] |
| Minimum board size | — | 75 mm x 50 mm (3" x 2")[6] |
| Board thickness | — | 0.8 mm to 5.0 mm including warpage[6] |
| Optional board thickness | — | 0.2 mm to 3.8 mm including warpage[6] |
| Maximum board weight | — | 4.5 kg (10 lb)[6] |
| Board edge clearance | — | 5 mm (0.19")[6] |
| Optional board edge clearance | — | 3 mm (0.12")[6] |
| Maximum underside clearance | — | 15 mm (0.59")[6] |
| Board support methods | — | Independent, movable, automatic (option) magnetic support pins, dedicated fixturing, GridLok, Gel-Flex[6] |
| Maximum print area | — | 559 mm x 498 mm (22" x 19.6")[6] |
| Snap-off | — | 0.2 mm x 10 mm/sec (0.008" x 0.39"/sec)[6] |
| Print speed | — | 5 mm to 200 mm/sec (0.2" to 7.87"/sec)[6] |
| Print force | — | Up to 20 kg (44 lb)[6] |
| Print stroke | — | 508 mm (20")[6] |
| Stencil frame size | — | 737 mm x 737 mm (29" x 29")[6] |
| Vision field-of-view | — | 13 mm x 10 mm[6] |
| Vision system | — | Single camera with patented look up/down vision with Cognex 8100 vision system[6] |
| Vision alignment | — | ±25 microns (±0.001") repeatability & accuracy at 6 Sigma, Cp greater than or equal to 2.0[6] |
| Print deposit repeatability | — | ±50 microns (±0.002") at 6 Sigma, Cp greater than or equal to 2.0[6] |
| Cycle time | — | Standard single-rail conveyor system 11.5 sec; optional triple-track conveyor system 10.0 sec[6] |
| Air supply requirements | — | 5 CFM at 90 psi, clean air supply, 1421/m @ 6.2 bar[6] |
| Height | — | 1575 mm (62")[6] |
| Depth | — | 1448 mm (57")[6] |
| Conveyor width | — | 1314 mm (51.7")[6] |
| Cover width | — | 1200 mm (47.25")[6] |
| Front clearance | — | 679 mm (26.75") minimum[6] |
| Rear clearance | — | 240 mm (9.45")[6] |
| Machine weight | — | 700 kg (1550 lb)[6] |
| Crated weight | — | 1140 kg (2500 lb)[6] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →