Waferpedia

Tektronix

TDS 410 Oscilloscope

Tektronix TDS 410 Oscilloscope family
Research Quality: 40% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

The Tektronix TDS 410 is a portable digitizing oscilloscope with two input channels. The TDS 410 offers a 150 MHz analog bandwidth and a maximum real-time sampling rate of 100 Megasamples per second. The TDS 410 provides 8-bit vertical resolution and a standard record length of 500 to 15,000 points per channel.[1]

Tektronix logo
Fig. — Manufacturer logo, not a photo of this toolWikimedia Commons (see file page for license)

Power

150 MHz[1]

Optics

8-bit[1]

What it is

An oscilloscope is a test instrument used to observe and measure varying signal voltages. The Tektronix TDS 410 is a portable digitizing oscilloscope introduced in 1993 as part of the TDS 400 series. The TDS 410 has two input channels. The TDS 410 has an analog bandwidth of 150 MHz. The TDS 410 digitizes at a maximum rate of 100 megasamples per second. The TDS 410 has 8-bit vertical resolution. The standard record length is 500 to 15,000 points. Option 1M extends the maximum record length to 60,000 points.[1]

How it works

The TDS 410 supports simultaneous acquisition of waveforms on all channels. The TDS 410 features a graphical user interface (GUI) and an on-board help mode. The TDS 410 offers specialized display modes including infinite and variable persistence. The TDS 410 can perform continuously updated measurements. With Option 2F Advanced DSP Math, the TDS 410 can compute and display the integral, differential, and FFT of waveforms.[1]

Applications

The TDS 410 offers video triggering capabilities with Option 5 Video Trigger. The TDS 410 provides full programmability and printer/plotter output.[1]

What do the numbers mean?

Power & electrical1

Analog bandwidth
150 MHz[1]
Accurate?

Optics & imaging1

Vertical resolution
8-bit[1]
Accurate?

Configuration & options5

Input channels
2[1]
Accurate?
Maximum digitizing rate
100 Megasamples/second[1]
Accurate?
Record length (standard)
500 to 15,000 points[1]
Accurate?
Maximum record length (with Option 1M)
60,000 points[1]
Accurate?
Form factor
Portable[1]
Accurate?
Interested in this tool?
Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

  • Analog bandwidth150 MHz[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the analog bandwidth of the Tektronix TDS 410?

The TDS 410 has an analog bandwidth of 150 MHz.[1]

How many input channels does the TDS 410 have?

The TDS 410 has two input channels.[1]

What is the maximum digitizing rate of the TDS 410?

The maximum digitizing rate is 100 megasamples per second.[1]

What is the vertical resolution of the TDS 410?

The vertical resolution is 8 bits.[1]

What are the standard record length options on the TDS 410?

The standard record length is 500 to 15,000 points.[1]

What does Option 1M provide for the TDS 410?

Option 1M extends the maximum record length to 60,000 points.[1]

Not publicly documented

The following facts about the TDS 410 Oscilloscope are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

  • No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the TDS 410 Oscilloscope are on record.

    Answerable by: OEM historical records or a trade-press announcement

  • No publicly documented variants, configuration options, or revision breakpoints of the TDS 410 Oscilloscope are on record.

    Answerable by: an OEM product catalog or an engineer who ordered or specified the tool

  • The control-system platform and OS era of the TDS 410 Oscilloscope are not on record.

    Answerable by: an engineer who operated it or OEM installation records

  • No publicly documented failure modes or field errata for the TDS 410 Oscilloscope are on record.

    Answerable by: a field service engineer, process engineer, or maintenance technician

  • The process node or technology generation of the TDS 410 Oscilloscope is not on record.

    Answerable by: an OEM datasheet or a fab qualification report

No research found yet — worked with this tool? Share what you know.

Sources & citations

Sources (2)Every fact above is drawn from these public sources
  1. [1]opweb.de — opweb.deopweb.de
  2. [2]Equipment inventory listing
Was this page accurate?

Last updated Sep 29, 2026.

Compare with similar tools

View all →