Signatone

H150W

Test & Probe 4-inch Signatone H150W family

Research Quality: 30% complete

SignatoneH150W

No photo available yet

What is it?

The H150W hybrid probe station is described with a 4-inch, round, nickel plated chuck, manual X-Y motion control, manual theta adjustment, and a set of micropositioners. The source also states it includes a microscope stage and an SMZ143 Motic Stereozoom microscope with a built-in CCD port.

What can it run?

Process applications and technology nodes documented for this tool.

4-inch applications

What do the numbers mean?

Vacuum & pumping1

Device hold-down: Vacuum toggle switch for device hold on chuck^[1]

Wafer handling1

Chuck: 4-inch, round, nickel plated chuck^[1]

Control & software2

X-Y motion control: Manual X-Y motion control^[1]
Micropositioners: 4 x S-725C#M micropositioners with X-Y-Z motion control^[1]

Configuration & options10

Model: H150W^[1]
Type: Hybrid probe station^[1]
Application: 4-inch applications^[1]
Theta adjustment: Manual theta adjustment^[1]
Platen lift: Quick platen lift raises the probes off the device before moving the device in X or Y directions^[1]
Microscope stage: 4-inch, X-Y push microscope stage^[1]
Microscope: SMZ143 Motic Stereozoom with built-in CCD port and 4:1 manual zoom^[1]
Platen lift travel: Coarse, quick platen lift of 3/8"; fine platen lift of 1.25"^[1]
Platen capacity: Holds up to 8 micropositioners^[1]
Warranty: 1 year limited warranty^[1]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Device hold-downVacuum toggle switch for device hold on chuck^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Not publicly documented

The following facts about the H150W are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the H150W are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the H150W are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the H150W are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the H150W are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the H150W is not on record.
Answerable by: an OEM datasheet or a fab qualification report