Pfeiffer
DCU 310 Turbopump Power & Control
What it is
General reference — not yet source-verifiedA turbopump power and control unit is the electronic subsystem that supplies electrical power to a turbopump's motor and manages its operation. Such a unit converts mains power into the drive power required by the pump rotor. The unit also provides control functions for starting, running, and stopping the attached pump.
How it works
General reference — not yet source-verifiedTurbopump drive units typically contain a power conversion stage and a motor controller. The controller regulates the rotational speed of the pump rotor through its operating range. The unit monitors the pump's operational state and can interface with the vacuum system's control infrastructure.
Where it fits in the process flow
General reference — not yet source-verifiedTurbopumps are used to generate high and ultra-high vacuum in process chambers. A turbopump is backed by a roughing pump that removes gas at higher pressures. The power and control unit drives the turbopump and forms part of the vacuum system's support infrastructure. Such systems are found in semiconductor fabrication and analytical instrument environments.
What do the numbers mean?
Power & electrical6
Configuration & options4
- 345 VA[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the DCU 310 Turbopump Power & Control are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DCU 310 Turbopump Power & Control are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the DCU 310 Turbopump Power & Control are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the DCU 310 Turbopump Power & Control are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DCU 310 Turbopump Power & Control are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DCU 310 Turbopump Power & Control is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Inventory photo
Last updated Oct 5, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13627 is a high efficiency RF match designed for semiconductor equipment.