Perkin Elmer
Optima 8000 ICP-OES
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
The Optima 8000 uses Flat Plate plasma technology, which replaces traditional helical induction coils with maintenance-free plates that reduce argon consumption. The instrument pairs a high-resolution echelle optical system with a simultaneous CCD detector operating across a 165–900 nm spectral range.[2]
How it works
The Optima 8000 incorporates a 40 MHz free-running RF plasma generator with an output power range of 750 to 1500 watts, controllable in 1-watt increments. The RF generator is located on the left side of the instrument. The system meets FCC certification requirements for RF emissions.[4]
The optical system of the Optima 8000 includes a double monochromator and a dual backside-illuminated CCD detector. Real-time Dynamic Wavelength Stabilization corrects for thermal drift. The instrument supports automatic dual viewing of the plasma, switching between axial and radial views to optimize sensitivity for trace and high-concentration elements.[4]
Applications
The system is particularly suited for EPA Method 6010D, which covers determination of metals in environmental samples. The Optima 8000's sensitivity and wide linear dynamic range allow simultaneous multi-element analysis in a single run, improving throughput for compliance monitoring.[2]
What do the numbers mean?
Power & electrical2
Optics & imaging1
Dimensions & facilities2
Configuration & options9
- PolyScience WhisperCool Chiller[1]
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| Optima 8000 ICP-OES with Prep3 | — | — | Includes Prep3. | cest.nd.edu[3] |
| Optima 8000 ICP-OES with S10 Autosampler | — | — | Includes S10 autosampler. | americanlaboratorytrading.com[4] |
| Optima 8000 ICP-OES with S10 Autosampler and PolyScience Chiller | — | — | Includes S10 autosampler and PolyScience WhisperCool refrigerated chiller. | americanlaboratorytrading.com[4] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What are the detection limits of the Optima 8000 ICP-OES?
The instrument can detect element concentrations as low as 5 µg/L (ppb) in solution and up to 100 mg/L (ppm).[3]
What is the wavelength range of the Optima 8000?
The instrument covers a spectral range from 165 to 900 nm.[2]
What autosampler is available for the Optima 8000?
The system can be configured with the Perkin Elmer S10 autosampler, which provides over 200 vessel positions and includes a built-in peristaltic pump for rinsing.[4]
What are the RF generator specifications of the Optima 8000?
The RF generator operates at 40 MHz with an output power range of 750 to 1500 watts, controllable in 1-watt increments, and power stability better than 0.1%.[4]
Not publicly documented
The following facts about the Optima 8000 ICP-OES are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Optima 8000 ICP-OES are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the Optima 8000 ICP-OES are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Optima 8000 ICP-OES are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Optima 8000 ICP-OES is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the Optima 8000 ICP-OES are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (5)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]amptechfl.com — amptechfl.comamptechfl.com
- [3]cest.nd.edu — cest.nd.educest.nd.edu
- [4]americanlaboratorytrading.com — americanlaboratorytrading.comamericanlaboratorytrading.com
- [5]PerkinElmer Optima 8000 ICP-OES Spectrometer – Spectralab Scientific Inc. — spectralabsci.comspectralabsci.com
Last updated Sep 23, 2026.
Compare with similar tools
View all →
The Perkin Elmer 1050 UV-VIS Spectrometer is an instrument used for analyzing ultraviolet and visible light absorption spectra.
The Agilent 11980 A is a fiber optic interferometer for precision optical measurements.