Panasonic
CM 602 L
The Panasonic CM 602 L is a Pick and Place machine. The Panasonic CM 602 L is manufactured by Panasonic. Panasonic CM 602 L units are configured with head assemblies such as (8 + 3 + DT), (3 + 3 + DT), (8 + 3), (12 + 8) and (3 + 3), and with feeder carts of 3 or 4.[1][2][3][4][5]
Plate 01Panasonic CM602-L pick and place machine
GOLDLAND SMT EQUIPMENTWatch on YouTubePlate 02Panasonic CM602-L CHIP MOUNTER
GOLDLAND SMT EQUIPMENTWatch on YouTubePlate 03SMT Panasonic CM602-L (NM-EJM8A) Placement Machine #panasonic #smtmachine #smt
Global Soul LimitedWatch on YouTube
What it is
How it works
General reference — not yet source-verifiedPick-and-place machines use a placement head that picks components from feeders and places them onto designated locations on a printed circuit board.
A vision system on the machine aligns the components and the board to achieve accurate placement.
Where it fits in the process flow
General reference — not yet source-verifiedThe Panasonic CM 602 L is used in the surface-mount assembly line after solder paste printing and before reflow soldering.
The machine places components on the board that has been coated with solder paste, and the assembly then proceeds to reflow to form permanent solder joints.
Applications
General reference — not yet source-verifiedThe Panasonic CM 602 L is applicable to the assembly of printed circuit boards for a wide range of electronic products.
Common application areas include consumer electronics, automotive electronics, industrial controls, and telecommunications equipment.
What do the numbers mean?
Power & electrical1
- 50/60 Hz[7]
Configuration & options24
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| CM 602 L | — | 2006–2006 | Listed with configurations (3 + 3 + DT), (8 + 3), (12 + 8), and (3 + 3), with feeder cart values of 3 or 4. | Equipment inventory listing[2] |
| CM 602 L (8 + 3 + DT) | — | 2014 | Configured with (8 + 3 + DT) head configuration and feeder cart 3 | Equipment inventory listing[1] |
| CM 602 L (3 + 3 + DT) | — | 2006 | Configured with (3 + 3 + DT) head configuration and feeder cart 3 | Equipment inventory listing[2] |
| CM 602 L (8 + 3) | — | 2006 | Configured with (8 + 3) head configuration and feeder cart 4 | Equipment inventory listing[3] |
| CM 602 L (12 + 8) | — | 2006 | Configured with (12 + 8) head configuration and feeder cart 4 | Equipment inventory listing[4] |
| CM 602 L (3 + 3) | — | 2006 | Configured with (3 + 3) head configuration and feeder cart 4 | Equipment inventory listing[5] |
What replaced it?
Alternatives
Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.
- Juki RS 1— Same function class: Assembly / SMT, UnknownCompare in depthsource[9]
- Juki FX 3 RAL— Same function class: Assembly / SMT, UnknownCompare in depthsource[10]
- Juki KE 3010 AL Placement— Same function class: Assembly / SMT, nullCompare in depthsource[11]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
- Configuration50/60 Hz[7]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the CM 602 L are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the CM 602 L are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the CM 602 L are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the CM 602 L are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the CM 602 L is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the CM 602 L are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (12)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]Inventory photo
- [3]Inventory photo
- [4]Inventory photo
- [5]inventory listing
- [6]Inventory photo
- [7]inventory listing
- [8]inventory listing
- [9]Equipment inventory listing
- [10]Equipment inventory listing
- [11]Equipment inventory listing
- [12]Equipment inventory listing
Last updated Oct 11, 2026.
Compare with similar tools
View all →
The Juki FX 3 RAL is a pick-and-place machine described with dual head, four tables, six segments per head, and 220 V / 60 Hz power.
The Juki KE 3010 AL Placement is an Assembly / SMT placement system.
The Juki RS 1 is a pick-and-place machine described with 220 V, 60 Hz, two tables, a single head, and eight segments per head.