Kulicke & Soffa
Rapid
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The K&S Rapid is a wire bonder. The Rapid is configured for single-phase power, and its largest load has a current rating of 4.6 A.[1]
What it is
General reference — not yet source-verifiedThe Kulicke & Soffa Rapid belongs to the class of automatic thermosonic wire bonders, which are precision assembly systems used to create electrical interconnections between a semiconductor die and its package or substrate. Machines of this class are a critical part of the back-end semiconductor manufacturing process, where they attach fine wires—typically gold, copper, or silver—from bond pads on the die to corresponding leads or pads on the package.
What do the numbers mean?
Power & electrical4
- Single Phase[1]
Configuration & options5
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
How does the speed of a wire bonder affect production throughput?General reference — not yet source-verified
The bond speed, measured in bonds per second, directly determines the throughput of the packaging line. Faster machines reduce cycle time per device, increasing overall factory output. However, speed must be balanced with bond quality and yield, as excessive speed can lead to bond defects or wire sweep issues.
What types of defects can occur during the wire bonding process?General reference — not yet source-verified
Common defects include non-stick or lifted bonds, wire tail breakage, wire sagging, bond deformation, and short circuits due to wire sweep. Process optimization and inline inspection systems help minimize these defects and maintain high yields.
Can this class of machine handle different package types without tooling changes?General reference — not yet source-verified
Many wire bonders in this class are designed with flexible work holders and programmable bond patterns, allowing them to accommodate various package sizes and lead counts with quick recipe changes. However, specific tooling may be needed for different die sizes or bond pad pitches.
What is the typical maintenance requirement for a wire bonder?General reference — not yet source-verified
Regular maintenance includes cleaning or replacing the capillary tool, calibrating bond parameters, checking wire tension, and cleaning optics. Preventive maintenance schedules vary by usage but often involve periodic checks to ensure consistent bond quality and machine uptime.
Not publicly documented
The following facts about the Rapid are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Rapid are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Rapid are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Rapid are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Rapid are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Rapid is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]Inventory photo
- [3]Inventory photo
- [4]Equipment inventory listing
Last updated Sep 30, 2026.
Compare with similar tools
View all →
Applied Materials model 0010-47763 is an ASSY ESC Bonded Monopolar Dual Heated unit.
The Applied Materials 0041-26723 is a bonded assembly used in semiconductor packaging and bonding applications.
The Logitech 1 WBS 1 is a wafer substrate bonder for 6-inch wafers.
