CEE
450 Spin
The CEE 450 Spin is a spin coater. The CEE 450 Spin handles up to 450mm round or 14" x 14" square substrates. The CEE 450 Spin uses internal OS software.[1][2]
What it is
How it works
Where it fits in the process flow
General reference — not yet source-verifiedA spin coater sits in the front end of wafer processing or laboratory patterning flows where uniform liquid films must be deposited before later thermal or lithographic steps. The tool commonly follows substrate loading and precedes bake, exposure, development, etch, or other downstream processing depending on the process.
Applications
What do the numbers mean?
Power & electrical2
- 208 Voltage[1]
Vacuum & pumping2
- Vacuum[1]
Wafer handling1
Control & software2
- Uses internal OS software system[1]
Configuration & options5
- Up to 450mm round or 14"x14" square[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the 450 Spin are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 450 Spin are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 450 Spin are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 450 Spin are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 450 Spin are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 450 Spin is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]COST EFFECTIVE EQUIPMENT APOGEE 450 OPERATION MANUAL Pdf Download | ManualsLib — manualslib.commanualslib.com
- [4]Apogee 450 Spin Coater - Benchtop - Cost Effective Equipment — costeffectiveequipment.comcosteffectiveequipment.com
Last updated Oct 5, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13622 is an RF match unit intended for PVD (Physical Vapor Deposition) described as a High Efficiency HE RF Match-Bias.
The Applied Materials 0020 12458 Part is an insulator, side match component for the Hdp-Cvd Ultima Plus system.