Comparison ledger
Disco DGP 8761, Lapmaster 15 Lapper, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | DGP 8761Disco | 15 LapperLapmaster |
|---|---|---|
| OEM | Disco | Lapmaster |
| Category | CMP | CMP |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Disco DGP 8761 | Lapmaster 15 |
| Specifications | ||
| Configuration | Inline DFM 2800 mounter / detaper[1] | Equipped with:[5] |
| Voltage | 200 V[2] | — |
| Phase | 3 Phase[2] | — |
| Full Load Current | 72 A[2] | — |
| Machine Main Breaker Rating | 90 A[2] | — |
| Rating of Largest Load | 33 A[2] | — |
| Interrupt Capacity | 35 kA[2] | — |
| Short Circuit Current Rating | 5000 A[2] | — |
| Equipment Type | Polisher[3] | — |
| Compatible Accessory | Water Temperature Control Unit (DTU series)[4] | — |
| OEM | Disco[3] | — |
| Model | DGP 8761[3] | — |
| Applicable product category | Polisher[4] | — |
| Applicable related equipment | Cutting machine, grinder, polisher[4] | — |
| Number Of Conditioning Rings | — | Up to 3[5] |
| Ring ID | — | Up to 5.5″[5] |
| Plate Diameter – Outside | — | 15″[5] |
| Plate Diameter – Inside | — | 3 1/2″[5] |
| Standard RPM | — | 60[5] |
| Drive Motor | — | 1/2 HP[5] |
| Electrics | — | 110V / 1Ph / 60Hz[5] |
| Dimensions – Approximate | — | 26″(L-R) x 21″(F-B) x 22″(H)[5] |
| Equipped with: 15″ Cast Iron Plate | — | Included[5] |
| Equipped with: (3) Yoke/Roller Bearing Assemblies | — | Included[5] |
| Equipped with: (3) Conditioning Rings | — | Included[5] |
| Equipped with: (3) Hold Downs | — | Included[5] |
| Equipped with: 30 Minute Timer | — | Included[5] |