Comparison ledger
Applied Materials 0010-03254 E Chuck, Fuji CP 642 Chip Shooter, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-03254 E ChuckApplied Materials | |
|---|---|---|
| OEM | Applied Materials | Fuji |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Fuji CP 642 Chip Shooter |
| Specifications | ||
| Configuration | — | With:[1] |
| Rated Speed | — | 40,000 CPH[2] |
| Placing Rate | — | 0.09 sec/component[2] |
| Placing Accuracy | — | ±0.01mm (3σ)[2] |
| PCB Dimensions Max | — | 457mm x 356mm[2] |
| PCB Dimensions Min | — | 80mm x 60mm[2] |
| Board Thickness | — | 0.3 to 4.0mm[2] |
| Component Capacity | — | Up to 140 types (8mm tape)[2] |
| Applicable Components | — | 0402 to 19mm x 20mm[2] |
| Maximum Component Height | — | 6mm[2] |
| Power | — | 3 phase 200 to 480 VAC, 10 kVA (1.25 kVA in power saving mode)[2] |
| Air Supply | — | 0.5 MPa (5 kgf/cm²)[2] |
| Machine Dimensions (L x W x H) | — | 4840mm x 1690mm x 1780mm[2] |
| Weight | — | Approx. 6000 kg[2] |
| Vintage | — | 1997[1] |