Comparison ledger
ABM -407B-2-S-CE-S293 Robot, SCREEN SCV660MD, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | SCV660MDSCREEN | |
|---|---|---|
| OEM | ABM | SCREEN |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | ABM -407B-2-S-CE-S293 Robot | SCREEN SCV660MD |
| Specifications | ||
| Model | ABM-407B-2-S-CE-S293[1] | — |
| Description | ROBOT[1] | — |
| Refurbished RTP RTA | AG Associates 4100, 4108, 8108, 8800, 8800i,210, 310, 410, 610, 610I, MPT RTP-600S, 800S, RTP-3000[1] | — |
| KLA-Tencor Spare Parts and Service | RS-35C,RS-55,RS-75,RS-100,UV-1050,UV-1080,UV-1250,UV-1280,ASET F5 / F5X,AIT Systems,HRP-220 Stylus Profiler[1] | — |
| Refurbished Isotropic Plasma Etcher | Matrix, Tegal, Lam Research, Branson/IPC, PlasmaTherm[1] | — |
| Refurbished PECVD, ALD Equipment | Cambridge, Oxford PlasmaLab , Plasma-Therm, STS/SPTS, AMAT[1] | — |
| Refurbished Mask Aligner | Canon Neutronix PLA501/545, Suss MA200CC, MA8BA8 GEN3, MA8BA8 GEN2, MA8BA8, MA200E[1] | — |
| Refurbished Bonding | SUSS SB6E, SUSS SB8E, EVG 620 BA, EVG EV501, West Bond 7200AR 7400A[1] | — |
| Refurbished Wafer Prober | Electroglas EG 4090u+, EG 4090, EG 2001X, EG 1034X, Cascade PS-21[1] | — |
| Product type | — | Equipment screen[2] |
| Model listing | — | SCV660MD[2] |
| Material | — | Extruded aluminum[2] |
| Fabrication | — | Mechanically fastened[2] |
| Finish | — | Finished-after-assemble[2] |
| Type | — | vertical blade louver[3] |
| Model designation | — | SCV660MD[3] |
| Construction material | — | extruded aluminum components[3] |
| Aluminum alloy | — | 6063-T5[3] |
| Louver depth | — | 6 in. (152.4 mm)[3] |
| Blades | — | vertical, V-type with center hook[3] |
| Blade spacing | — | 0.75 in. on center[3] |
| Frame thickness | — | 0.095 in. (2.41 mm)[3] |
| Blade thickness | — | 0.063 in. (1.60 mm)[3] |
| Visible mullions | — | yes[3] |
| Free area | — | 7.29 sq. ft. (0.68 m²)[3] |
| Percent free area | — | 45.6%[4] |
| Beginning point of water penetration | — | above 1,250 fpm (6.35 m/s) free area velocity[3] |
| Minimum air volume flow rate at beginning point of water penetration | — | 9,112 cfm (4.30 m³/s)[3] |
| Maximum static pressure at beginning point of water penetration | — | 0.18 in. H2O (0.4 kPa)[3] |
| Max intake volume | — | 9,100 cfm (4.295 m³/s)[4] |
| Intake pressure drop at 6,000 CFM | — | 0.107 in. wg (0.027 kPa)[4] |
| Maximum wind load | — | +/- 150 PSF (7.2 kPa)[4] |
| Minimum rough opening size | — | 12 in. W x 12 in. H (305 mm W x 305 mm H)[4] |
| Maximum rough opening size | — | Unlimited W x 120.5 in. H (unlimited W x 3061 mm H)[4] |
| Maximum rough opening single section sizes | — | 48.5 in. W x 120.5 in. H; 60.5 in. W x 96.5 in. H; 96.5 in. W x 60.5 in. H[4] |
| AMCA certification | — | licensed to bear the AMCA Seal[4] |
| AMCA listing | — | approved to bear the AMCA Listing Label[4] |
| Florida Product Approval No. | — | FL16746[4] |
| Miami-Dade NOA No. | — | 22-0707.09, EXP. 10/4/2027[4] |
| Test standards | — | AMCA Standard 500-L, AMCA 540, AMCA 550, TAS 201, TAS 202, TAS 203[4] |