Comparison ledger
Nitto HR 8500 III TW UV Detaper, Thermo Fisher 1300 Series Safety, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 1300 Series SafetyThermo Fisher | |
|---|---|---|
| OEM | Nitto | Thermo Fisher |
| Category | Wet Processing / Clean | Wet Processing / Clean |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | 2026 Third-party support only |
| Control system | — | — |
| Generation | — | — |
| Family | Nitto HR 8500 III TW UV Detaper | Thermo Fisher 1300 |
| Specifications | ||
| Control Method | One Board Micro Computer[1] | — |
| Wafer Transfer Robot | 3-axis type[1] | — |
| Configuration | Installation Environment:[1] | Class II[2] |
| Temperature | 25 ± 5 degrees C[1] | — |
| Humidity | 45 ± 15%[1] | — |
| Others | Clean level ; Class 1,000 or more (Place where it will be subjected to direct sunlight)[1] | — |
| Power | 1.5 kVA[1] | — |
| For Air | Rc 3/8 screw[1] | — |
| Lug with grounding linw (Cable Length | Approx. 5m)[1] | — |
| OEM | Nitto Denko[1] | — |
| Model | HR 8500 III TW UV[1] | — |
| Wafer Sizes | 8 inch[1] | — |
| Clean level | Class 1,000 or more[1] | — |
| Power Supply | Single Phase; AC 100 V ± 5%; 1.5 kVA; 50/60 Hz[1] | — |
| Air Supply | Dry Air; 0.5 MPa or more; 250 NL/min or more[1] | — |
| Connection Port | For electrical power; For Air: Rc 3/8 screw; Lug with grounding linw (Cable Length: Approx. 5m)[1] | — |
| Cabinet type | — | Class II, Type A2 biological safety cabinet[3] |
| Airflow compensation | — | SmartFlow airflow compensation system[3] |
| Motors | — | Dual DC motors[3] |
| Front window design | — | SmartClean front window design[3] |
| Control panel | — | Intuitive control panel with constant readout of downflow and inflow velocities and filter reserve status[3] |
| UV light | — | Programmable UV light[3] |
| SmartPort | — | SmartPort convenience for routing tubing and cables through the side walls[3] |
| Available widths | — | 3-foot, 4-foot, 5-foot, and 6-foot sizes[3] |
| Front opening choices | — | 8-inch or 10-inch front opening[3] |
| Filter specification | — | H14 HEPA filters, EN 1822, 99.995% @ MPPS[4] |
| Certification | — | NSF/ANSI 49, UL, CE[4] |
| Service valves | — | Up to 6 total, 3 on each side wall[4] |
Plan your fab
Building a Wet Processing / Clean process? Get a complete equipment list.
Open the fab equipment planner →