Comparison ledger
Lapmaster 15 Lapper, Struers TenuPol-5, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 15 LapperLapmaster | TenuPol-5Struers |
|---|---|---|
| OEM | Lapmaster | Struers |
| Category | CMP | CMP |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Lapmaster 15 | Struers TenuPol-5 |
| Specifications | ||
| Number Of Conditioning Rings | Up to 3[1] | — |
| Ring ID | Up to 5.5″[1] | — |
| Plate Diameter – Outside | 15″[1] | — |
| Plate Diameter – Inside | 3 1/2″[1] | — |
| Standard RPM | 60[1] | — |
| Drive Motor | 1/2 HP[1] | — |
| Electrics | 110V / 1Ph / 60Hz[1] | — |
| Dimensions – Approximate | 26″(L-R) x 21″(F-B) x 22″(H)[1] | — |
| Configuration | Equipped with:[1] | — |
| Equipped with: 15″ Cast Iron Plate | Included[1] | — |
| Equipped with: (3) Yoke/Roller Bearing Assemblies | Included[1] | — |
| Equipped with: (3) Conditioning Rings | Included[1] | — |
| Equipped with: (3) Hold Downs | Included[1] | — |
| Equipped with: 30 Minute Timer | Included[1] | — |
| Equipment type | — | Electropolishing[2] |
| Function | — | Prepares TEM sections of electrically conductive materials through electrolytical thinning[2] |
| Polishing voltage range | — | 0-100 V (0.1 V steps)[3] |
| Polishing current | — | 2.5 A[3] |
| Electrolyte container capacity | — | approximately 1 liter[4] |
| Recommended electrolyte temperature range | — | -50°C to +45°C (-58°F to +113°F)[4] |
| Pump flow rate range | — | 0-50 (arbitrary units)[4] |
| Specimen disc diameters (pre-thinning) | — | 10 mm[4] |
| Specimen disc diameters (final thinning) | — | 3 mm[4] |
| Light stop detection | — | Auto or ignore[4] |
| Flow modes | — | Single flow, Dual flow step, Dual flow ramp[4] |
| Output voltage (polishing) | — | 0-100 V (0.1 V steps)[3] |
| Output current (polishing) | — | 2.5 A[3] |
| Width | — | 270 mm (10.6")[3] |
| Depth | — | 180 mm (7.1")[3] |
| Height | — | 276 mm (10.9")[3] |
| Weight | — | 3.8 kg (8.4 lbs)[3] |
| Operating temperature | — | 5-40°C (41-104°F)[3] |
| Operating humidity | — | 0-95 % RH non-condensing[3] |
| Storage temperature | — | -25-55°C (13-113°F)[3] |
| Storage humidity | — | 0-95 % RH non-condensing[3] |
| Noise level | — | LpA = 55.4 dB(A) (measured value), Uncertainty K = 4 dB[3] |