Comparison ledger
Heller 1707 EXL Reflow Soldering, Speedline Momentum, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | MomentumSpeedline | |
|---|---|---|
| OEM | Heller | Speedline |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Speedline Momentum |
| Cited variants | — | |
| Specifications | ||
| Make | Heller[2] | Speedline / MPM[4] |
| Model | 1707 EXL[2] | Momentum[4] |
| Machine type | Reflow soldering machine / reflow soldering oven[2] | — |
| Vintage | 2005[2] | — |
| Power input | Standard 208/240 VAC 3-phase[3] | — |
| Breaker size | 100 amps @ 480 V[3] | — |
| Optional power inputs | 380/400/440/415/480 VAC[3] | — |
| Frequency | 50/60 Hz[3] | — |
| Overall length | 134 in (340 cm)[3] | — |
| Overall width | 54 in (137 cm)[3] | — |
| Overall height | 63 in (160 cm)[3] | — |
| Typical net weight | 3000 lbs (1360 kg)[3] | — |
| Operating system | Windows XP[3] | — |
| Top heating zones | 7[3] | — |
| Bottom heating zones | 7[3] | — |
| Cooling zones | 1[3] | — |
| Heater type | Instant response open coil[3] | — |
| Heater material | Nichrome[3] | — |
| Temperature range | 25-350°C standard; high temperature up to 450°C optional[3] | — |
| Maximum conveyor speed | 74 in/min (188 cm/min)[3] | — |
| Voltage | — | 200-240[4] |
| Configuration | — | 50/60 Hz[4] |
| Equipment type | — | Screen Printers[5] |
| Software version | — | Benchmark V3.6.0[5] |
| Power | — | 200-240 1Kva[5] |
| Vision | — | Look Up/Down Digital Camera[5] |
| Inspection interface | — | CamX[5] |
| Paste dispenser | — | Manual[5] |
| Max board size (X, Y) | — | 609.6 mm x 508 mm (24" x 20")[5] |
| Min board size (X, Y) | — | 50.8 mm x 50.8 mm (2" x 2")[5] |
| Board thickness | — | 0.2mm to 5.0mm[5] |
| Max board weight | — | 4.5 kg (9.92 lbs)[5] |
| Max print area (X, Y) | — | 609.6 mm x 508 mm (24" x 20")[1] |
| Print gap (snap-off) | — | 0 mm to 6.35 mm (0" to 0.25")[1] |
| Print speed | — | Up to 305 mm/sec (12.0"/sec)[1] |
| Print force | — | 0 to 20 kg (0 lb to 44 lbs)[1] |
| Stencil frame size | — | 737 mm x 737 mm (29" x 29")[1] |
| Camera system | — | Single digital camera - MPM patented look up/down vision[1] |
| Total system alignment | — | ±12.5 microns[1] |
| Wet print deposit accuracy | — | ±20 microns[1] |
| Cycle time | — | Momentum 11 seconds standard; Momentum+ 9 seconds standard; Momentum HiE 7.5 seconds standard; Momentum Elite 6 seconds standard[1] |
| Power requirements | — | 200 to 240 VAC (±10%) single phase @ 50/60Hz, 15 A[1] |
| Air supply requirements | — | 100 psi at 4 cfm to 18 cfm[1] |
| Machine weight | — | 862 kg (1900 lbs) for Momentum, Momentum+, Momentum HiE; 899 kg (1982 lbs) for Momentum Elite[1] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →