Comparison ledger
DEK 248, Speedline Momentum Elite, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 248DEK | Momentum EliteSpeedline |
|---|---|---|
| OEM | DEK | Speedline |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | DEK 248 | Speedline Momentum |
| Cited variants |
| |
| Specifications | ||
| Print area | 432 mm x 405 mm (17 in x 15.9 in) max[4] | — |
| Maximum board size | 500 mm x 450 mm (19.5 in x 17.5 in) max[4] | — |
| Machine accuracy | ±25 µm @ 3 sigma[4] | — |
| Machine repeatability | ±10 µm @ 3 sigma[4] | — |
| Machine capability | 0.3 mm pitch QFP 0402 chip packages using vision alignment[4] | — |
| Vision alignment tools | DEKalign 4[4] | — |
| Machine interface | Stand alone[4] | — |
| Power supply | 220 V or 110 V single phase[4] | — |
| Power consumption | Less than 1 kW[4] | — |
| Air supply | Minimum pressure 4 bar (60 psi), clean and dry[4] | — |
| Vacuum supply | Internal vacuum ejector[4] | — |
| Approximate weight | 480 kg (1,056 lbs)[4] | — |
| Approximate dimensions | 1200 mm (W) x 1130 mm (D) x 1140 mm (H) nominal[4] | — |
| Screen frame size | 508 mm x 508 mm (20 in x 20 in) internal[4] | — |
| Operator interface | Machine: easy-touch LCD control console with backlight; Vision: trackball mouse operated[4] | — |
| Operational modes | Double squeegee print/print, print/flood, flood/print[4] | — |
| Print speed | 10-70 mm (0.4-2.7 in)/sec; standard independent forward and reverse speed settings in 1 mm (0.04)/sec increments[4] | — |
| Menu storage | 30 alphanumeric[4] | — |
| Board filename length | 12 characters maximum[4] | — |
| Language options | English, German, French[4] | — |
| Print Area (max) | 432mm x 405mm (17in x 15.9in)[4] | — |
| Max Board Size | 500mm x 450mm (19.5in x 17.5in)[4] | — |
| Print Speed | 10-70mm/sec (0.4-2.7in/sec) standard[4] | — |
| Print Stroke (max) | 450mm[4] | — |
| Squeegee Pressure | 0-15kg (0-33lb) manual dial[4] | — |
| Maximum Board Size | 500mm x 450mm (19.5in x 17.5in)[4] | — |
| Board and Tooling Thickness Range | 20mm to 40mm (0.8in to 1.6in)[4] | — |
| Max Board & Tooling Weight | 5 kg (2.27lbs)[4] | — |
| Vision Alignment System | DEKalign 4[5] | — |
| Air Supply (min pressure) | 4 bar (60 psi) clean and dry[4] | — |
| Weight (approximate) | 480kg (1,056lbs)[4] | — |
| Dimensions (W x D x H) | 1200mm x 1130mm x 1140mm (47.2in x 44.5in x 44.9in)[4] | 1675.5 mm (65.96") x 1593.1 mm (62.72") x 1638.4 mm (64.5")[1] |
| Screen Frame Size (internal) | 508mm x 508mm (20in x 20in)[4] | — |
| Print Gap | 0-23.5mm in 0.1mm increments[4] | — |
| Board Feed Direction | Left-to-right[4] | — |
| Menu Storage | 30 alphanumeric programs[4] | — |
| Work Table Height Adjustment | 820mm min / 1060mm max[4] | — |
| Configuration | — | 50/60 Hz[6] |
| Largest Single Load | — | 6 Amps[6] |
| Full Load Current | — | 10 Amps[6] |
| Maximum Board Size (X x Y) | — | 609.6 mm x 508 mm (24" x 20")[1] |
| Maximum Board Size (X x Y) in Staging Mode (Momentum Elite) | — | 457 mm x 508 mm (18" x 20")[1] |
| Minimum Board Size (X x Y) | — | 50.8 mm x 50.8 mm (2" x 2")[1] |
| Board Thickness | — | 0.2 mm (0.008") to 5.0 mm (0.20"), up to 6.0 mm (0.24") without top clamp foils[1] |
| Maximum Print Area (X x Y) | — | 609.6 mm x 508 mm (24" x 20")[1] |
| Print Gap (Snap-off) | — | 0 mm to 6.35 mm (0" to 0.25")[1] |
| Stencil Frame Size | — | 737 mm x 737 mm (29" x 29")[1] |
| Vision Field-of-View (FOV) | — | 106 mm x 8 mm[1] |
| Total System Alignment | — | 12.5 microns[1] |
| Alignment Repeatability | — | ±0.0005" at 6 sigma, Cpk of greater than or equal to 2.0[1] |
| Power Requirements | — | 200 to 240 VAC Single Phase 50/60Hz[1] |
| Air Supply | — | 100 PSI at 4 CFM[1] |
| Machine Weight | — | 899 kg (1982 lbs)[1] |
| Wet Print Accuracy | — | 20 microns @ 6 sigma, Cpk > 2[7] |
| Maximum Board Weight | — | 4.5 kg (9.92 lbs)[7] |
| Board Edge Clearance | — | 3.0 mm (0.118")[7] |
| Underside Clearance | — | 12.7 mm (0.5") standard / Configurable for 25.4 mm (1.0")[7] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →