Comparison ledger
Bruker ContourGT X 3 D Optical Profiler, Zygo NewView 8000, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | NewView 8000Zygo | |
|---|---|---|
| OEM | Bruker | Zygo |
| Category | Precision Optics | Precision Optics |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Bruker ContourGT X 3 D Optical Profiler | Zygo NewView 8000 |
| Cited variants | — | |
| Specifications | ||
| Configuration | Single Phase[3] | — |
| Full Load Power | 400 VA[1] | — |
| AC Input | 115/230 V[1] | — |
| Manufacturer | Bruker[1] | Zygo[4] |
| Category | Precision Optics[1] | — |
| Electrical configuration | Single Phase[1] | — |
| Frequency | 50/60 Hz[1] | — |
| Vintage | 2022[3] | — |
| Model | — | NewView 8000[4] |
| Product category | — | Optical Profilers[4] |
| Related item | — | 176mm Riser kit, NewView 8000/9000[4] |
| Measurement technique | — | 3D coherence scanning interferometry including SureScan technology[2] |
| Profiling type | — | 3D optical surface profiler[5] |
| Form factor | — | benchtop surface profiler[2] |
| Non-contact operation | — | non-contact[5] |
| Software | — | Mx software[2] |
| Stage options | — | manual, motorized, and encoded stage options[2] |
| Sample stage XY travel | — | manual XY: 100 mm travel; motorized XY: 150 mm travel[2] |
| Tilt range | — | ±4°[2] |
| Maximum scan rate | — | 96 μm/sec (NewView 8300); 34 μm/sec (NewView 8200)[2] |
| Surface topography repeatability | — | 0.12 nm for all magnifications[2] |
| Repeatability of RMS | — | 0.01 nm[2] |
| Field of view | — | from 16 × 16 mm to 40 × 40 μm[2] |
| Dimensions | — | 75 × 64 × 56 cm benchtop mainframe; 151 × 73 × 61 cm with stand[2] |
| Weight | — | 91 kg benchtop configuration; 229 kg with stand configuration[2] |
| Input voltage | — | 100 to 240 VAC, 50/60 Hz[2] |
| Compressed air requirement | — | 4.1 to 5.5 bar (60 to 80 psi), dry and filtered[2] |
| Open work area | — | open work area with clear lines of sight[5] |
| Available configurations | — | single zoom NewView 8200 and triple zoom NewView 8300[5] |
| Sample staging | — | fully manual X/Y and tilt stages to fully automated stages with 150 mm of travel and 4 degrees of tilt[5] |
| Product type | — | Non-contact benchtop surface profiler[6] |
| Configurable models | — | NewView 8200 and NewView 8300[5] |
| XY stage travel | — | Manual XY: 100 mm travel; Motorized XY: 150 mm travel[2] |
| Vertical scan range | — | 150 µm with precision Piezo drive; 20 mm with extended scan[2] |
| Maximum data scan speed | — | 34 µm/sec[2] |
| Physical dimensions, benchtop mainframe | — | 75 x 64 x 56 cm[2] |
| System weight, benchtop configuration | — | 91 kg[2] |
| Work volume, standard system | — | 89 x 150 x 150 mm[6] |
| Work volume, optional riser kit system | — | 265 x 150 x 150 mm with optional 176 mm riser kit[6] |
Plan your fab
Building a Precision Optics process? Get a complete equipment list.
Open the fab equipment planner →