Comparison ledger
ASML PAS 5500 300 C DUV, Nikon 1505 G 6 E, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 1505 G 6 ENikon | |
|---|---|---|
| OEM | ASML | Nikon |
| Category | Lithography | Lithography |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | 1988– |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | ASML PAS 5500 | Nikon 1505 |
| Cited variants |
| — |
| Specifications | ||
| Configuration | Can be configured for 3" - 6"[1] | 5" reticle[3] |
| OEM | ASML[1] | — |
| Model | PAS 5500 / 300 C[1] | 1505 G 6 E[3] |
| Tool type | DUV Stepper (Deep Ultraviolet)[1] | — |
| Wafer sizes | 8 inch[1] | — |
| Exposure wavelength | 248 nm[2] | — |
| Lens column | DUV (248nm), 0.63 N.A.[2] | — |
| Reduction | 4:1[2] | 5x[4] |
| Exposure field size | up to 22 mm square[2] | — |
| Minimum feature size | <0.20 µm[2] | — |
| Wafer size range | 3 inch up to 200 mm[2] | — |
| Alignment | Registered alignment is typically <0.045 µm, even when using backside alignment[2] | — |
| Mask size | 6 inch x 0.250 inch thick quartz masks[2] | — |
| Stage motion | laser-controlled stage motion[2] | — |
| Illumination | programmable annular illumination modes[2] | — |
| Backside alignment | 3D-Align backside alignment[2] | — |
| Exposure Wavelength | 248nm (DUV)[2] | — |
| Lens Numerical Aperture | 0.63 - 0.40 variable[2] | — |
| Reduction Ratio | 4:1[2] | — |
| Exposure Field Size | 22 mm x 22 mm[2] | — |
| Wafer Size Range | 3" up to 200mm[2] | — |
| Registered Algnment | Typically <0.045 µm[2] | — |
| Mask Size | 6" x0.250"- thick quartz masks[2] | — |
| Laser Source | Cymr 5600 Laser[1] | — |
| Wafter Size (from listing) | 8 inch[1] | — |
| Vintage Year | 1996[1] | — |
| Resolution | — | 650 nm[4] |
| Numerical Aperture | — | 0.54[4] |
| Exposure Field | — | 15 x 15 mm[4] |
| Alignment Accuracy | — | 130 nm[4] |
| Wafer Size | — | 4 inch[3] |
| Light Source | — | g-line[5] |
| Introduction Year | — | 1988[4] |
| NA (Numerical Aperture) | — | 0.54[4] |
| Make | — | Nikon[3] |
| Category | — | Stepper[3] |
| Wafer Sizes | — | 4 inch[3] |
| Exposure type | — | g-line[4] |
| NA | — | 0.54[4] |
| Exposure field | — | 9.3 x 18.8 mm[4] |
Plan your fab
Building a Lithography process? Get a complete equipment list.
Open the fab equipment planner →