Comparison ledger
Agilent 1100 Series HPLC, Applied Materials 0010-03254 E Chuck, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 1100 Series HPLCAgilent | 0010-03254 E ChuckApplied Materials |
|---|---|---|
| OEM | Agilent | Applied Materials |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | 1995– | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Agilent 1100 Series HPLC | — |
| Cited variants |
| — |
| Specifications | ||
| Flow range (isocratic pump) | 0.2 ml/min to 10 ml/min[1] | — |
| Flow range (binary pump) | 0.1 – 5.0 ml/min (settable 0.001 – 5 ml/min)[2] | — |
| Pressure range (binary pump) | 0 – 400 bar (0 – 5880 psi)[2] | — |
| Flow precision (binary pump) | < 0.3 % RSD (typically 0.15 %) at 1 ml/min[2] | — |
| Wavelength range (DAD) | 190 – 950 nm[2] | — |
| Detector short term noise (DAD) | ± 1 × 10⁻⁵ AU at 254 and 750 nm[2] | — |
| Autosampler injection range | 0.1 – 100 µl (standard), up to 1500 µl with multiple draw[2] | — |
| Autosampler precision | Typically < 0.5 % RSD from 5 – 100 µl[2] | — |
| Module weight (isocratic pump, VWD, TCC) | 11.0 kg (25.0 lbs) each[3] | — |
| Module dimensions (width × depth × height, most modules) | 345 × 435 × 140 mm (13.5 × 17 × 5.5 in)[3] | — |
| Line voltage | 100 – 120 or 220 – 240 VAC, ± 10 %[3] | — |
| Ambient operating temperature | 0 – 55 °C (32 – 131 °F)[3] | — |
| Make/OEM | Agilent (formerly Hewlett-Packard)[5] | — |
| Model | 1100 Series[5] | — |
| Category | High Performance Liquid Chromatography (HPLC)[5] | — |
| Introduction Year | 1995[2] | — |
| Modules/Components | Isocratic pump (G1310A), binary pump (G1312A), quaternary pump (G1311A), capillary pump, preparative pump, standard autosampler (G1313A), well-plate autosampler, thermostatted micro autosampler, micro well-plate autosampler, thermostatted column compartment (G1316A), vacuum degasser (G1322A), variable wavelength detector (G1314A/B), diode array detector (G1315A/B), multiwavelength detector, fluorescence detector (G1321A), refractive index detector (G1362A), mass selective detector LC/MSD VL/SL, LC/MSD Trap, controllers, handheld control module, ChemStation software[1] | — |
| Pump Flow Range (Isocratic) | 0.001 – 10 ml/min[1] | — |
| Pump Flow Range (Binary) | 0.001 – 5.0 ml/min[1] | — |
| Pump Flow Range (Quaternary) | 0.001 – 10 ml/min[1] | — |
| Pump Flow Range (Capillary) | 0.01 μl/min – 2.5 ml/min[1] | — |
| Pump Flow Range (Preparative) | 0.001 – 100 ml/min[1] | — |
| Flow Precision | 0.3% RSD (typically < 0.15% RSD)[1] | — |
| Pressure Range (Binary/Isocratic/Quaternary) | 0 – 400 bar (0 – 5880 psi)[2] | — |
| VWD Wavelength Range | 190 – 600 nm[1] | — |
| DAD/MWD Wavelength Range | 190 – 950 nm[1] | — |
| DAD Short-term Noise | ± 1 × 10-5 AU at 254 nm and 750 nm[1] | — |
| Column Compartment Temperature Range | 10 °C below ambient to 80 °C[1] | — |
| Autosampler Injection Volume (Standard) | 0.1 – 100 μl standard range, up to 1800 μl or 5000 μl with extension[1] | — |
| Detectors | Variable Wavelength (VWD), Multiwavelength (MWD), Diode Array (DAD), Fluorescence (FLD), Refractive Index (RID), Mass Selective (LC/MSD VL/SL, LC/MSD Trap)[1] | — |
| Control and Data Handling | Handheld controller, Agilent ChemStation (2D/3D), Cerity Networked Data System, ChemStation Plus, Security Pack for 21 CFR Part 11 compliance[1] | — |
| Communications | Controller-area network (CAN), GPIB, RS-232C, APG Remote (ready, start, stop, shut-down), LAN (optional)[2] | — |
| Dimensions (Isocratic Pump, VWD, FLD) | 345 mm × 435 mm × 140 mm (13.5 × 17 × 5.5 inches) (W × D × H)[3] | — |
| Weight (Isocratic Pump) | 11.0 kg (25.0 lbs)[3] | — |